2010 Prior Design Mercedes-Benz SL R230 PD
|
Price |
-- |
Production |
-- | ||
|
Engine |
-- |
Weight |
-- | ||
|
Aspiration |
-- |
Torque |
-- | ||
|
HP |
-- |
HP/Weight |
-- | ||
|
HP/Liter |
-- |
1/4 mile |
-- | ||
|
0-62 mph |
-- |
Top Speed |
-- |
(from Prior Design
Press Release) SL maximum – the PD-SERIES
Right in time for the industry trade fair Tuning World Bodensee,
PRIOR design presented their latest creation – the PD-SERIES based
on the Mercedes-Benz SL R230.
The self-set target of the Kamp-Lintfort company was making the
"large" Mercedes-Benz roadster even more perfect. The PD-SERIES
inspiration very clearly was the super sports car Mercedes-Benz SL65
AMG Black Series. The result will excite every car enthusiast:
Flowing lines, expressive curves, massive air inlets and muscular
sides summarize the perfect PD-SERIES view.
Let us look at it in detail, starting with the front. This is where
the superior width of the PD-SERIES hardly makes it possible for the
viewer to avert his eyes from the overwhelming fenders. Still
getting over the endorphin-filled moment surprise, the eye takes I
the harmonious line flowing from the fender to the front area. Only
few centimetres below the futuristic Facelift headlights, there is a
front spoiler with large, greedy air inlets. The cowl with its many
air inlets reaches up to the windshield supplying even
high-performance motors with sufficient air.
The side area with its wide wheels is reminiscent of a muscular monster waiting to jump its prey. The side dills harmoniously connect the masculine sides to make the car look as if made from a single cast.
Going father around the
vehicle, we can then see the rear, dominant due to the imposing
wheel arches that make the SL seem impossibly wide. The large track
of the PD-SERIES is connected by a perfectly rounded rear bumper
from one wheel arch to the other, which in turn is equipped with a
diffuser based on racing technology. It is available either as sight
carbon or full carbon.
A specially developed wheel/tyre combination is available as a
complete set in the following sizes:
Wheel rim PD1 (three-piece stainless steel outer bed, black finish),
front axle 10x20 inch with 265/30R20, rear axle 12x20 inch with
305/25R20
Finally, Prior-Design makes it possible to lower the car
mechanically as well as electronically (with integrated Airmatic).
Using the above wheel/tyre combination, Prior-Design also recommends
optimising the suspension tuning.
For further information, price and delivery information, contact:
Prior-Design
Robert-Bosch-Straße 11
47475 Kamp-Lintfort
Tel.: 0 28 42 / 97 57 00
Fax: 0 28 42 / 97 57 010
www.prior-design.de