|
Price |
|
-- |
Production |
|
-- |
|
Engine |
V10 |
Weight |
2646
lbs or less |
|
Aspiration |
turbocharger |
Torque |
-- |
|
HP |
about 500 hp |
HP/Weight |
-- |
|
HP/Liter |
-- |
1/4 mile |
-- |
|
0-62 mph |
-- |
Top Speed |
-- |
The first I2B Project is
called Raven. In basics, it was designed to be a LeMans prototype
for a European super car manufacturer. The conception was classic -
two wheel drive with a longitudinal middle engine. The profile of
the car was designed especially to has the lowest as possible center
of gravity and the lowest air resistance. To clear the design our
first step was to build a clay model of the car in 1:10 scale. Some
basic calculation for air resistance were made on Fluent. The first
conception did not have enough down force so we decided to put a
rear wing which at low speed would lay on the back end of the car.
Main dimensions and characteristics:
Wheels/Tires
Front: 255/40 ZR 20
Rear: 335/30 ZR 20
Length
4600 mm
Width
2010 mm
Height
1100 mm
Wheelbase
2600 mm
Ground Clearance
70 mm
Engine - V10 Turbo charged with about 500HP
Weight no more than 1200 Kg
The Raven should had been on LeMans at 2006 but because of the small
amount of investments into this project it is still on the drawing
board waiting for better times to come.
